Codici di Errore / Sense Codes
Le unità ottiche restituiscono codici di errore (o Sense codes come vengono chiamati nell'industria) quando succede qualche problema o anche solo per comunicare all'host (PC o applicazione) alcune situazioni.
Lo standard che descrive questi messaggi è MMC :
MMC-3 Revision 10e
Table A.1
Logical Unit Sense Key, ASC and ASCQ Assignments
SK ASC ASCQ
0 / 00 / 00 NO ADDITIONAL SENSE INFORMATION
B / 00 / 06 I/O PROCESS TERMINATED
5 / 00 / 11 AUDIO PLAY OPERATION IN PROGRESS
5 / 00 / 12 AUDIO PLAY OPERATION PAUSED
5 / 00 / 13 AUDIO PLAY OPERATION SUCCESSFULLY COMPLETED
5 / 00 / 14 AUDIO PLAY OPERATION STOPPED DUE TO ERROR
5 / 00 / 15 NO CURRENT AUDIO STATUS TO RETURN
4 / 00 / 17 CLEANING REQUESTED
3 / 02 / 00 NO SEEK COMPLETE
2 / 04 / 00 LOGICAL UNIT NOT READY, CAUSE NOT REPORTABLE
2 / 04 / 01 LOGICAL UNIT IS IN PROCESS OF BECOMING READY
2 / 04 / 02 LOGICAL UNIT NOT READY, INITIALIZING CMD. REQUIRED
2 / 04 / 03 LOGICAL UNIT NOT READY, MANUAL INTERVENTION REQUIRED
2 / 04 / 04 LOGICAL UNIT NOT READY, FORMAT IN PROGRESS
2 / 04 / 07 LOGICAL UNIT NOT READY, OPERATION IN PROGRESS
2 / 04 / 08 LOGICAL UNIT NOT READY, LONG WRITE IN PROGRESS
4 / 05 / 00 LOGICAL UNIT DOES NOT RESPOND TO SELECTION
3 / 06 / 00 NO REFERENCE POSITION FOUND
5 / 07 / 00 MULTIPLE PERIPHERAL DEVICES SELECTED
4 / 08 / 00 LOGICAL UNIT COMMUNICATION FAILURE
4 / 08 / 01 LOGICAL UNIT COMMUNICATION TIME-OUT
4 / 08 / 02 LOGICAL UNIT COMMUNICATION PARITY ERROR
4 / 08 / 03 LOGICAL UNIT COMMUNICATION CRC ERROR (ULTRA-DMA/32)
4 / 09 / 00 TRACK FOLLOWING ERROR
4 / 09 / 01 TRACKING SERVO FAILURE
4 / 09 / 02 FOCUS SERVO FAILURE
4 / 09 / 03 SPINDLE SERVO FAILURE
4 / 09 / 04 HEAD SELECT FAULT
6 / 0A / 00 ERROR LOG OVERFLOW
1 / 0B / 00 WARNING
1 / 0B / 01 WARNING - SPECIFIED TEMPERATURE EXCEEDED
1 / 0B / 02 WARNING - ENCLOSURE DEGRADED
3 / 0C / 00 WRITE ERROR
3 / 0C / 07 WRITE ERROR - RECOVERY NEEDED
3 / 0C / 08 WRITE ERROR - RECOVERY FAILED
3 / 0C / 09 WRITE ERROR - LOSS OF STREAMING
3 / 0C / 0A WRITE ERROR - PADDING BLOCKS ADDED
3 / 11 / 00 UNRECOVERED READ ERROR
3 / 11 / 01 READ RETRIES EXHAUSTED
3 / 11 / 02 ERROR TOO LONG TO CORRECT
3 / 11 / 05 L-EC UNCORRECTABLE ERROR
3 / 11 / 06 CIRC UNRECOVERED ERROR
3 / 11 / 0F ERROR READING UPC/EAN NUMBER
3 / 11 / 10 ERROR READING ISRC NUMBER
B / 11 / 11 READ ERROR - LOSS OF STREAMING
3 / 15 / 00 RANDOM POSITIONING ERROR
3 / 15 / 01 MECHANICAL POSITIONING ERROR
3 / 15 / 02 POSITIONING ERROR DETECTED BY READ OF MEDIUM
1 / 17 / 00 RECOVERED DATA WITH NO ERROR CORRECTION APPLIED
1 / 17 / 01 RECOVERED DATA WITH RETRIES
1 / 17 / 02 RECOVERED DATA WITH POSITIVE HEAD OFFSET
1 / 17 / 03 RECOVERED DATA WITH NEGATIVE HEAD OFFSET
1 / 17 / 04 RECOVERED DATA WITH RETRIES AND/OR CIRC APPLIED
1 / 17 / 05 RECOVERED DATA USING PREVIOUS SECTOR ID
1 / 17 / 07 RECOVERED DATA WITHOUT ECC - RECOMMEND REASSIGNMENT
1 / 17 / 08 RECOVERED DATA WITHOUT ECC - RECOMMEND REWRITE
1 / 17 / 09 RECOVERED DATA WITHOUT ECC - DATA REWRITTEN
1 / 18 / 00 RECOVERED DATA WITH ERROR CORRECTION APPLIED
1 / 18 / 01 RECOVERED DATA WITH ERROR CORR. & RETRIES APPLIED
1 / 18 / 02 RECOVERED DATA - DATA AUTO-REALLOCATED
1 / 18 / 03 RECOVERED DATA WITH CIRC
1 / 18 / 04 RECOVERED DATA WITH L-EC
1 / 18 / 05 RECOVERED DATA . RECOMMEND REASSIGNMENT
1 / 18 / 06 RECOVERED DATA . RECOMMEND REWRITE
1 / 18 / 08 RECOVERED DATA WITH LINKING
5 / 1A / 00 PARAMETER LIST LENGTH ERROR
4 / 1B / 00 SYNCHRONOUS DATA TRANSFER ERROR
A / 1D / 00 MISCOMPARE DURING VERIFY OPERATION
5 / 20 / 00 INVALID COMMAND OPERATION CODE
5 / 21 / 00 LOGICAL BLOCK ADDRESS OUT OF RANGE
5 / 21 / 01 INVALID ELEMENT ADDRESS
5 / 21 / 02 INVALID ADDRESS FOR WRITE
5 / 24 / 00 INVALID FIELD IN CDB
5 / 25 / 00 LOGICAL UNIT NOT SUPPORTED
5 / 26 / 00 INVALID FIELD IN PARAMETER LIST
5 / 26 / 01 PARAMETER NOT SUPPORTED
5 / 26 / 02 PARAMETER VALUE INVALID
5 / 26 / 03 THRESHOLD PARAMETERS NOT SUPPORTED
5 / 26 / 04 INVALID RELEASE OF ACTIVE PERSISTENT RESERVATION
5 / 27 / 00 WRITE PROTECTED
5 / 27 / 01 HARDWARE WRITE PROTECTED
5 / 27 / 02 LOGICAL UNIT SOFTWARE WRITE PROTECTED
5 / 27 / 03 ASSOCIATED WRITE PROTECT
5 / 27 / 04 PERSISTENT WRITE PROTECT
5 / 27 / 05 PERMANENT WRITE PROTECT
7 / 27 / 06 CONDITIONAL WRITE PROTECT
6 / 28 / 00 NOT READY TO READY CHANGE, MEDIUM MAY HAVE CHANGED
6 / 28 / 01 IMPORT OR EXPORT ELEMENT ACCESSED
6 / 29 / 00 POWER ON, RESET, OR BUS DEVICE RESET OCCURRED
6 / 29 / 01 POWER ON OCCURRED
6 / 29 / 02 SCSI BUS RESET OCCURRED
6 / 29 / 03 BUS DEVICE RESET FUNCTION OCCURRED
6 / 29 / 04 DEVICE INTERNAL RESET
6 / 2A / 00 PARAMETERS CHANGED
6 / 2A / 01 MODE PARAMETERS CHANGED
6 / 2A / 02 LOG PARAMETERS CHANGED
6 / 2A / 03 RESERVATIONS PREEMPTED
5 / 2B / 00 COPY CANNOT EXECUTE SINCE INITIATOR CANNOT DISCONNECT
5 / 2C / 00 COMMAND SEQUENCE ERROR
5 / 2C / 03 CURRENT PROGRAM AREA IS NOT EMPTY
5 / 2C / 04 CURRENT PROGRAM AREA IS EMPTY
6 / 2E / 00 INSUFFICIENT TIME FOR OPERATION
6 / 2F / 00 COMMANDS CLEARED BY ANOTHER INITIATOR
2 / 30 / 00 INCOMPATIBLE MEDIUM INSTALLED
2 / 30 / 01 CANNOT READ MEDIUM . UNKNOWN FORMAT
2 / 30 / 02 CANNOT READ MEDIUM . INCOMPATIBLE FORMAT
2 / 30 / 03 CLEANING CARTRIDGE INSTALLED
2 / 30 / 04 CANNOT WRITE MEDIUM . UNKNOWN FORMAT
2 / 30 / 05 CANNOT WRITE MEDIUM . INCOMPATIBLE FORMAT
2 / 30 / 06 CANNOT FORMAT MEDIUM . INCOMPATIBLE MEDIUM
2 / 30 / 07 CLEANING FAILURE
5 / 30 / 08 CANNOT WRITE . APPLICATION CODE MISMATCH
5 / 30 / 09 CURRENT SESSION NOT FIXATED FOR APPEND
5 / 30 / 10 MEDIUM NOT FORMATTED
3 / 31 / 00 MEDIUM FORMAT CORRUPTED
3 / 31 / 01 FORMAT COMMAND FAILED
3 / 31 / 02 ZONED FORMATTING FAILED DUE TO SPARE LINKING
/ 34 / 00 ENCLOSURE FAILURE
/ 35 / 00 ENCLOSURE SERVICES FAILURE
/ 35 / 01 UNSUPPORTED ENCLOSURE FUNCTION
/ 35 / 02 ENCLOSURE SERVICES UNAVAILABLE
/ 35 / 03 ENCLOSURE SERVICES TRANSFER FAILURE
/ 35 / 04 ENCLOSURE SERVICES TRANSFER REFUSED
1 / 37 / 00 ROUNDED PARAMETER
5 / 39 / 00 SAVING PARAMETERS NOT SUPPORTED
2 / 3A / 00 MEDIUM NOT PRESENT
2 / 3A / 01 MEDIUM NOT PRESENT - TRAY CLOSED
2 / 3A / 02 MEDIUM NOT PRESENT - TRAY OPEN
6 / 3B / 0D MEDIUM DESTINATION ELEMENT FULL
6 / 3B / 0E MEDIUM SOURCE ELEMENT EMPTY
6 / 3B / 0F END OF MEDIUM REACHED
6 / 3B / 11 MEDIUM MAGAZINE NOT ACCESSIBLE
6 / 3B / 12 MEDIUM MAGAZINE REMOVED
6 / 3B / 13 MEDIUM MAGAZINE INSERTED
6 / 3B / 14 MEDIUM MAGAZINE LOCKED
6 / 3B / 15 MEDIUM MAGAZINE UNLOCKED
4 / 3B / 16 MECHANICAL POSITIONING OR CHANGER ERROR
5 / 3D / 00 INVALID BITS IN IDENTIFY MESSAGE
2 / 3E / 00 LOGICAL UNIT HAS NOT SELF-CONFIGURED YET
4 / 3E / 01 LOGICAL UNIT FAILURE
4 / 3E / 02 TIMEOUT ON LOGICAL UNIT
6 / 3F / 00 TARGET OPERATING CONDITIONS HAVE CHANGED
6 / 3F / 01 MICROCODE HAS BEEN CHANGED
6 / 3F / 02 CHANGED OPERATING DEFINITION
6 / 3F / 03 INQUIRY DATA HAS CHANGED
4 / 40 / NN DIAGNOSTIC FAILURE ON COMPONENT NN (80H-FFH)
5 / 43 / 00 MESSAGE ERROR
4 / 44 / 00 INTERNAL TARGET FAILURE
B / 45 / 00 SELECT OR RESELECT FAILURE
4 / 46 / 00 UNSUCCESSFUL SOFT RESET
4 / 47 / 00 SCSI PARITY ERROR
B / 48 / 00 INITIATOR DETECTED ERROR MESSAGE RECEIVED
B / 49 / 00 INVALID MESSAGE ERROR
4 / 4A / 00 COMMAND PHASE ERROR
4 / 4B / 00 DATA PHASE ERROR
4 / 4C / 00 LOGICAL UNIT FAILED SELF-CONFIGURATION
B / 4D / NN TAGGED OVERLAPPED COMMANDS (NN = QUEUE TAG)
B / 4E / 00 OVERLAPPED COMMANDS ATTEMPTED
3 / 51 / 00 ERASE FAILURE
3 / 51 / 01 ERASE FAILURE - INCOMPLETE ERASE OPERATION DETECTED
4 / 53 / 00 MEDIA LOAD OR EJECT FAILED
5 / 53 / 02 MEDIUM REMOVAL PREVENTED
5 / 55 / 00 SYSTEM RESOURCE FAILURE
3 / 57 / 00 UNABLE TO RECOVER TABLE-OF-CONTENTS
6 / 5A / 00 OPERATOR REQUEST OR STATE CHANGE INPUT
6 / 5A / 01 OPERATOR MEDIUM REMOVAL REQUEST
6 / 5A / 02 OPERATOR SELECTED WRITE PROTECT
6 / 5A / 03 OPERATOR SELECTED WRITE PERMIT
6 / 5B / 00 LOG EXCEPTION
6 / 5B / 01 THRESHOLD CONDITION MET
6 / 5B / 02 LOG COUNTER AT MAXIMUM
6 / 5B / 03 LOG LIST CODES EXHAUSTED
1 / 5D / 01 FAILURE PREDICTION THRESHOLD EXCEEDED . Predicted Media failure
1 / 5D / 02 LOGICAL UNIT FAILURE PREDICTION THRESHOLD EXCEEDED
1 / 5D / 03 FAILURE PREDICTION THRESHOLD EXCEEDED . Predicted Spare Area Exhaustin
1 / 5D / FF FAILURE PREDICTION THRESHOLD EXCEEDED (FALSE)
6 / 5E / 00 LOW POWER CONDITION ON
6 / 5E / 01 IDLE CONDITION ACTIVATED BY TIMER
6 / 5E / 02 STANDBY CONDITION ACTIVATED BY TIMER
6 / 5E / 03 IDLE CONDITION ACTIVATED BY COMMAND
6 / 5E / 04 STANDBY CONDITION ACTIVATED BY COMMAND
5 / 63 / 00 END OF USER AREA ENCOUNTERED ON THIS TRACK
5 / 63 / 01 PACKET DOES NOT FIT IN AVAILABLE SPACE
5 / 64 / 00 ILLEGAL MODE FOR THIS TRACK
5 / 64 / 01 INVALID PACKET SIZE
4 / 65 / 00 VOLTAGE FAULT
5 / 6F / 00 COPY PROTECTION KEY EXCHANGE FAILURE . AUTHENTICATION FAILURE
5 / 6F / 01 COPY PROTECTION KEY EXCHANGE FAILURE . KEY NOT PRESENT
5 / 6F / 02 COPY PROTECTION KEY EXCHANGE FAILURE .KEY NOT ESTABLISHED
5 / 6F / 03 READ OF SCRAMBLED SECTOR WITHOUT AUTHENTICATION
5 / 6F / 04 MEDIA REGION CODE IS MISMATCHED TO LOGICAL UNIT REGION
5 / 6F / 05 LOGICAL UNIT REGION MUST BE PERMANENT/REGION RESET COUNT ERROR
3 / 72 / 00 SESSION FIXATION ERROR
3 / 72 / 01 SESSION FIXATION ERROR WRITING LEAD-IN
3 / 72 / 02 SESSION FIXATION ERROR WRITING LEAD-OUT
5 / 72 / 03 SESSION FIXATION ERROR . INCOMPLETE TRACK IN SESSION
5 / 72 / 04 EMPTY OR PARTIALLY WRITTEN RESERVED TRACK
5 / 72 / 05 NO MORE TRACK RESERVATIONS ALLOWED
3 / 73 / 00 CD CONTROL ERROR
1 / 73 / 01 POWER CALIBRATION AREA ALMOST FULL
3 / 73 / 02 POWER CALIBRATION AREA IS FULL
3 / 73 / 03 POWER CALIBRATION AREA ERROR
3 / 73 / 04 PROGRAM MEMORY AREA UPDATE FAILURE
3 / 73 / 05 PROGRAM MEMORY AREA IS FULL
3 / 73 / 06 RMA/PMA IS ALMOST FULL
0 / 00 / 00 NO ADDITIONAL SENSE INFORMATION
B / 00 / 06 I/O PROCESS TERMINATED
2 / 04 / 00 LOGICAL UNIT NOT READY, CAUSE NOT REPORTABLE
2 / 04 / 01 LOGICAL UNIT IS IN PROCESS OF BECOMING READY
2 / 04 / 02 LOGICAL UNIT NOT READY, INITIALIZING CMD. REQUIRED
2 / 04 / 03 LOGICAL UNIT NOT READY, MANUAL INTERVENTION REQUIRED
2 / 04 / 04 LOGICAL UNIT NOT READY, FORMAT IN PROGRESS
2 / 04 / 07 LOGICAL UNIT NOT READY, OPERATION IN PROGRESS
2 / 04 / 08 LOGICAL UNIT NOT READY, LONG WRITE IN PROGRESS
4 / 05 / 00 LOGICAL UNIT DOES NOT RESPOND TO SELECTION
5 / 07 / 00 MULTIPLE PERIPHERAL DEVICES SELECTED
4 / 08 / 00 LOGICAL UNIT COMMUNICATION FAILURE
4 / 08 / 01 LOGICAL UNIT COMMUNICATION TIME-OUT
4 / 08 / 02 LOGICAL UNIT COMMUNICATION PARITY ERROR
6 / 0A / 00 ERROR LOG OVERFLOW
1 / 0B / 00 WARNING
1 / 0B / 01 WARNING - SPECIFIED TEMPERATURE EXCEEDED
1 / 0B / 02 WARNING - ENCLOSURE DEGRADED
5 / 1A / 00 PARAMETER LIST LENGTH ERROR
4 / 1B / 00 SYNCHRONOUS DATA TRANSFER ERROR
5 / 20 / 00 INVALID COMMAND OPERATION CODE
5 / 24 / 00 INVALID FIELD IN CDB
5 / 25 / 00 LOGICAL UNIT NOT SUPPORTED
5 / 26 / 00 INVALID FIELD IN PARAMETER LIST
5 / 26 / 01 PARAMETER NOT SUPPORTED
5 / 26 / 02 PARAMETER VALUE INVALID
6 / 28 / 00 NOT READY TO READY CHANGE, MEDIUM MAY HAVE CHANGED
6 / 29 / 00 POWER ON, RESET, OR BUS DEVICE RESET OCCURRED
6 / 29 / 01 POWER ON OCCURRED
6 / 29 / 02 SCSI BUS RESET OCCURRED
6 / 29 / 03 BUS DEVICE RESET FUNCTION OCCURRED
6 / 29 / 04 DEVICE INTERNAL RESET
6 / 2A / 00 PARAMETERS CHANGED
6 / 2A / 01 MODE PARAMETERS CHANGED
6 / 2A / 02 LOG PARAMETERS CHANGED
6 / 2F / 00 COMMANDS CLEARED BY ANOTHER INITIATOR
/ 34 / 00 ENCLOSURE FAILURE
/ 35 / 00 ENCLOSURE SERVICES FAILURE
/ 35 / 01 UNSUPPORTED ENCLOSURE FUNCTION
/ 35 / 02 ENCLOSURE SERVICES UNAVAILABLE
/ 35 / 03 ENCLOSURE SERVICES TRANSFER FAILURE
/ 35 / 04 ENCLOSURE SERVICES TRANSFER REFUSED
5 / 3D / 00 INVALID BITS IN IDENTIFY MESSAGE
2 / 3E / 00 LOGICAL UNIT HAS NOT SELF-CONFIGURED YET
4 / 3E / 01 LOGICAL UNIT FAILURE
4 / 3E / 02 TIMEOUT ON LOGICAL UNIT
6 / 3F / 00 TARGET OPERATING CONDITIONS HAVE CHANGED
6 / 3F / 01 MICROCODE HAS BEEN CHANGED
6 / 3F / 02 CHANGED OPERATING DEFINITION
6 / 3F / 03 INQUIRY DATA HAS CHANGED
4 / 40 / NN DIAGNOSTIC FAILURE ON COMPONENT NN (80H-FFH)
5 / 43 / 00 MESSAGE ERROR
4 / 44 / 00 INTERNAL TARGET FAILURE
B / 45 / 00 SELECT OR RESELECT FAILURE
4 / 46 / 00 UNSUCCESSFUL SOFT RESET
4 / 47 / 00 SCSI PARITY ERROR
B / 48 / 00 INITIATOR DETECTED ERROR MESSAGE RECEIVED
B / 49 / 00 INVALID MESSAGE ERROR
4 / 4A / 00 COMMAND PHASE ERROR
4 / 4B / 00 DATA PHASE ERROR
4 / 4C / 00 LOGICAL UNIT FAILED SELF-CONFIGURATION
B / 4D / NN TAGGED OVERLAPPED COMMANDS (NN = QUEUE TAG)
B / 4E / 00 OVERLAPPED COMMANDS ATTEMPTED
6 / 5A / 00 OPERATOR REQUEST OR STATE CHANGE INPUT
6 / 5A / 01 OPERATOR MEDIUM REMOVAL REQUEST
6 / 5B / 00 LOG EXCEPTION
6 / 5B / 01 THRESHOLD CONDITION MET
6 / 5B / 02 LOG COUNTER AT MAXIMUM
6 / 5B / 03 LOG LIST CODES EXHAUSTED
6 / 5D / 00 FAILURE PREDICTION THRESHOLD EXCEEDED
6 / 5D / FF FAILURE PREDICTION THRESHOLD EXCEEDED (FALSE)
4 / 65 / 00 VOLTAGE FAULT
4 / 00 / 17 CLEANING REQUESTED
3 / 02 / 00 NO SEEK COMPLETE
3 / 06 / 00 NO REFERENCE POSITION FOUND
4 / 09 / 00 TRACK FOLLOWING ERROR
4 / 09 / 01 TRACKING SERVO FAILURE
4 / 09 / 02 FOCUS SERVO FAILURE
4 / 09 / 03 SPINDLE SERVO FAILURE
4 / 09 / 04 HEAD SELECT FAULT
3 / 11 / 00 UNRECOVERED READ ERROR
3 / 11 / 01 READ RETRIES EXHAUSTED
3 / 11 / 02 ERROR TOO LONG TO CORRECT
3 / 11 / 05 L-EC UNCORRECTABLE ERROR
3 / 11 / 06 CIRC UNRECOVERED ERROR
3 / 11 / 0F ERROR READING UPC/EAN NUMBER
3 / 11 / 10 ERROR READING ISRC NUMBER
3 / 15 / 00 RANDOM POSITIONING ERROR
3 / 15 / 01 MECHANICAL POSITIONING ERROR
3 / 15 / 02 POSITIONING ERROR DETECTED BY READ OF MEDIUM
1 / 17 / 00 RECOVERED DATA WITH NO ERROR CORRECTION APPLIED
1 / 17 / 01 RECOVERED DATA WITH RETRIES
1 / 17 / 02 RECOVERED DATA WITH POSITIVE HEAD OFFSET
1 / 17 / 03 RECOVERED DATA WITH NEGATIVE HEAD OFFSET
1 / 17 / 04 RECOVERED DATA WITH RETRIES AND/OR CIRC APPLIED
1 / 17 / 05 RECOVERED DATA USING PREVIOUS SECTOR ID
1 / 17 / 07 RECOVERED DATA WITHOUT ECC - RECOMMEND REASSIGNMENT
1 / 17 / 08 RECOVERED DATA WITHOUT ECC - RECOMMEND REWRITE
1 / 17 / 09 RECOVERED DATA WITHOUT ECC - DATA REWRITTEN
1 / 18 / 00 RECOVERED DATA WITH ERROR CORRECTION APPLIED
1 / 18 / 01 RECOVERED DATA WITH ERROR CORR. & RETRIES APPLIED
1 / 18 / 02 RECOVERED DATA - DATA AUTO-REALLOCATED
1 / 18 / 03 RECOVERED DATA WITH CIRC
1 / 18 / 04 RECOVERED DATA WITH L-EC
1 / 18 / 05 RECOVERED DATA . RECOMMEND REASSIGNMENT
1 / 18 / 06 RECOVERED DATA . RECOMMEND REWRITE
5 / 21 / 00 LOGICAL BLOCK ADDRESS OUT OF RANGE
2 / 30 / 00 INCOMPATIBLE MEDIUM INSTALLED
2 / 30 / 01 CANNOT READ MEDIUM . UNKNOWN FORMAT
2 / 30 / 02 CANNOT READ MEDIUM . INCOMPATIBLE FORMAT
2 / 30 / 03 CLEANING CARTRIDGE INSTALLED
2 / 30 / 07 CLEANING FAILURE
3 / 31 / 00 MEDIUM FORMAT CORRUPTED
2 / 3A / 00 MEDIUM NOT PRESENT
2 / 3A / 01 MEDIUM NOT PRESENT - TRAY CLOSED
2 / 3A / 02 MEDIUM NOT PRESENT - TRAY OPEN
3 / 57 / 00 UNABLE TO RECOVER TABLE-OF-CONTENTS
6 / 5E / 00 LOW POWER CONDITION ON
6 / 5E / 01 IDLE CONDITION ACTIVATED BY TIMER
6 / 5E / 02 STANDBY CONDITION ACTIVATED BY TIMER
6 / 5E / 03 IDLE CONDITION ACTIVATED BY COMMAND
6 / 5E / 04 STANDBY CONDITION ACTIVATED BY COMMAND
5 / 63 / 00 END OF USER AREA ENCOUNTERED ON THIS TRACK
5 / 64 / 00 ILLEGAL MODE FOR THIS TRACK
3 / 73 / 00 CD CONTROL ERROR
3 / 0C / 00 WRITE ERROR
3 / 0C / 07 WRITE ERROR - RECOVERY NEEDED
3 / 0C / 08 WRITE ERROR - RECOVERY FAILED
3 / 0C / 09 WRITE ERROR - LOSS OF STREAMING
3 / 0C / 0A WRITE ERROR - PADDING BLOCKS ADDED
5 / 27 / 00 WRITE PROTECTED
5 / 27 / 01 HARDWARE WRITE PROTECTED
5 / 27 / 02 LOGICAL UNIT SOFTWARE WRITE PROTECTED
5 / 27 / 03 ASSOCIATED WRITE PROTECT
5 / 27 / 04 PERSISTENT WRITE PROTECT
5 / 27 / 05 PERMANENT WRITE PROTECT
2 / 30 / 04 CANNOT WRITE MEDIUM . UNKNOWN FORMAT
2 / 30 / 05 CANNOT WRITE MEDIUM . INCOMPATIBLE FORMAT
5 / 30 / 08 CANNOT WRITE . APPLICATION CODE MISMATCH
5 / 30 / 09 CURRENT SESSION NOT FIXATED FOR APPEND
5 / 30 / 10 MEDIUM NOT FORMATTED
6 / 5A / 02 OPERATOR SELECTED WRITE PROTECT
6 / 5A / 03 OPERATOR SELECTED WRITE PERMIT
1 / 73 / 01 POWER CALIBRATION AREA ALMOST FULL
3 / 73 / 02 POWER CALIBRATION AREA IS FULL
3 / 73 / 03 POWER CALIBRATION AREA ERROR
3 / 73 / 04 PROGRAM MEMORY AREA UPDATE FAILURE
3 / 73 / 05 PROGRAM MEMORY AREA IS FULL
5 / 2C / 03 CURRENT PROGRAM AREA IS NOT EMPTY
5 / 2C / 04 CURRENT PROGRAM AREA IS EMPTY
3 / 72 / 00 SESSION FIXATION ERROR
3 / 72 / 01 SESSION FIXATION ERROR WRITING LEAD-IN
3 / 72 / 02 SESSION FIXATION ERROR WRITING LEAD-OUT
5 / 72 / 03 SESSION FIXATION ERROR . INCOMPLETE TRACK IN SESSION
5 / 72 / 04 EMPTY OR PARTIALLY WRITTEN RESERVED TRACK
Note:
1. Tutti i valori sono i esadecimale
2. Quando non viene dato nessun valore per SK, l'errore è applicabile a diversi sense keys.